RTSP协议实现发送ACC音频数据

news/2024/7/10 21:52:13 标签: 网络, ffmpeg

一.AAC音频格式介绍


        AAC音频格式：Advanced Audio Coding（高级音频解码），是一种由MPEG—4标准定义的有损音频压缩格式。音频压缩编码的输出码流，以音频帧的形式存在。每个音频帧包含若干个音频采样的压缩数据，AAC的一个音频帧包含960或1024个样值，这些压缩编码后的音频帧称为原始数据块(RawData Block)，由于原始数据块以帧的形式存在，即简称为原始帧。     

二.AAC编码封装格式

 原始帧是可变的，如果对原始帧进行ADTS的封装，得到的原始帧为ADTS帧；如果对原始帧进行ADIF封装，得到的原始帧为ADIF帧。它们的区别如下：

ADIF：AudioData Interchange Format，音频数据交换格式。这种格式明确解码必须在明确定义的音频数据流的开始处进行，常用于磁盘文件中；

ADTS：AudioData Transport Stream，音频数据传输流。这种格式的特点是它一个有同步字的比特流，且允许在音频数据流的任意帧解码，也就是说，它每一帧都有信息头。

三.ADTS帧组成

     一个AAC原始数据库长度是可变的，对原始帧加上ADTS头进行ADTS封装就形成了ADTS帧。AAC音频的每一帧(ADTS帧)体由ADTS Header和AAC Audio Data(包含1~4个音频原始帧)组成，其中，ADTS Header占7个字节或9个字节，由两部分组成：固定头信息(adts_fixed_header)、可变头信息(adts_variable_header)。固定头信息中的数据每一帧都是相同的，主要定义了音频的采样率、声道数、帧长度等关键信息，这是解码AAC所需关键信息；可变头信息则在帧与帧之间可变。

ADTS组成结

ADTS Header结构体

struct AdtsHeader {
    unsigned int syncword;  //12 bit 同步字 '1111 1111 1111'，一个ADTS帧的开始
    uint8_t id;        //1 bit 0代表MPEG-4, 1代表MPEG-2。
    uint8_t layer;     //2 bit 必须为0
    uint8_t protectionAbsent;  //1 bit 1代表没有CRC，0代表有CRC
    uint8_t profile;           //1 bit AAC级别（MPEG-2 AAC中定义了3种profile，MPEG-4 AAC中定义了6种profile）
    uint8_t samplingFreqIndex; //4 bit 采样率
    uint8_t privateBit;        //1bit 编码时设置为0，解码时忽略
    uint8_t channelCfg;        //3 bit 声道数量
    uint8_t originalCopy;      //1bit 编码时设置为0，解码时忽略
    uint8_t home;               //1 bit 编码时设置为0，解码时忽略

    uint8_t copyrightIdentificationBit;   //1 bit 编码时设置为0，解码时忽略
    uint8_t copyrightIdentificationStart; //1 bit 编码时设置为0，解码时忽略
    unsigned int aacFrameLength;               //13 bit 一个ADTS帧的长度包括ADTS头和AAC原始流
    unsigned int adtsBufferFullness;           //11 bit 缓冲区充满度，0x7FF说明是码率可变的码流，不需要此字段。CBR可能需要此字段，不同编码器使用情况不同。这个在使用音频编码的时候需要注意。

    /* number_of_raw_data_blocks_in_frame
     * 表示ADTS帧中有number_of_raw_data_blocks_in_frame + 1个AAC原始帧
     * 所以说number_of_raw_data_blocks_in_frame == 0
     * 表示说ADTS帧中有一个AAC数据块并不是说没有。(一个AAC原始帧包含一段时间内1024个采样及相关数据)
     */
    uint8_t numberOfRawDataBlockInFrame; //2 bit
};

ADTS Header参数含义：

syncword：占12bits。同步头信息，表示一个ADTS帧的开始，总是0xFFF。正是因为它的存在，才支持解码任意帧；

ID：            占1bit。MPEG的版本，0为MPGE-4，1为MPGE-2；

Layer：      占2bits。总是”00”；

protection_absent：占1bit。=0时，ADTS Header长度占9字节；=1时，ADTS Header占7字节；

profile：     占2bit。使用哪个级别的AAC，值00、01、10分别对应Mainprofile、LC、SSR；
sampling_frequency_index：占4bits。表示使用的采样率下标，通过这个下标在Sampling Frequencies[ ]数组中查找得知采样率的值，如0xb，对应的采样率为8000Hz；

channel_configuration：表示声道数，如1-单声道，2-立体声

orininal_copy：    1bit    编码时设置为0，解码时忽略。
home ：   1bit    编码时设置为0，解码时忽略。
copyrightIdentificationBit：   1bit    编码时设置为0，解码时忽略。
copyrightIdentificationStart：    1bit    编码时设置为0，解码时忽略。
aacFrameLength：    13bit    一个ADTS帧的⻓度，包括ADTS头和AAC原始流。
adtsBufferFullness ：   11bit    缓冲区充满度，0x7FF说明是码率可变的码流，不需要此字段。CBR可能需要此字段，不同编码器使用情况不同。具体查看附录。
numberOfRawDataBlockInFrame：    2bit    表示ADTS帧中有number_of_raw_data_blocks_in_frame + 1个AAC原始帧，为0表示说ADTS帧中只有一个AAC数据.

四.ACC音频的RTP打包方式

 AAC的RTP打包方式就是将ADTS帧取出ADTS头部，取出AAC数据，每帧数据封装成一个RTP包,需要注意的是，并不是将AAC数据直接拷贝到RTP的载荷中。AAC封装成RTP包，在RTP载荷中的前四个字节是有特殊含义的，然后再是AAC数据，如下图所示。

RTP头部1bit1bit1bit1bit                         ACC  DATA

RTP包的结构由RTP头部和RTP载荷组成，由上图所知，RTP载荷分为4个字节和ACC的数据组成。我们需要注意的，RTP封装包并不是将AAC数据直接拷贝到RTP的载荷中，AAC封装成RTP包，在RTP载荷中的前四个字节是有特殊含义的，然后再封装AAC数据。

其中RTP载荷的一个字节为0x00，第二个字节为0x10。第三个字节和第四个字节保存AAC Data的大小，最多只能保存13bit，第三个字节保存数据大小的高八位，第四个字节的高5位保存数据大小的低5位。

rtpPacket->payload[0] = 0x00;
rtpPacket->payload[1] = 0x10;
rtpPacket->payload[2] = (frameSize & 0x1FE0) >> 5; //高8位
rtpPacket->payload[3] = (frameSize & 0x1F) << 3; //低5位

RTSP协议推送音频数据代码实现

main.cpp

#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <time.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <WinSock2.h>
#include <WS2tcpip.h>
#include <windows.h>
#include "rtp.h"

#define SERVER_PORT     8554
#define SERVER_RTP_PORT  55532
#define SERVER_RTCP_PORT 55533
#define BUF_MAX_SIZE    (1024*1024)
#define AAC_FILE_NAME   "../data/test-long.aac"

static int createTcpSocket() {
    int sockfd;
    int on = 1;

    sockfd = socket(AF_INET, SOCK_STREAM, 0);
    if (sockfd < 0)
        return -1;

    setsockopt(sockfd, SOL_SOCKET, SO_REUSEADDR, (const char*)&on, sizeof(on));

    return sockfd;
}

static int createUdpSocket() {
    int sockfd;
    int on = 1;

    sockfd = socket(AF_INET, SOCK_DGRAM, 0);
    if (sockfd < 0)
        return -1;

    setsockopt(sockfd, SOL_SOCKET, SO_REUSEADDR, (const char*)&on, sizeof(on));

    return sockfd;
}

static int bindSocketAddr(int sockfd, const char* ip, int port) {
    struct sockaddr_in addr;

    addr.sin_family = AF_INET;
    addr.sin_port = htons(port);
    addr.sin_addr.s_addr = inet_addr(ip);

    if (bind(sockfd, (struct sockaddr*)&addr, sizeof(struct sockaddr)) < 0)
        return -1;

    return 0;
}

struct AdtsHeader {
    unsigned int syncword;  //12 bit ͬ���� '1111 1111 1111'��һ��ADTS֡�Ŀ�ʼ
    uint8_t id;        //1 bit 0����MPEG-4, 1����MPEG-2��
    uint8_t layer;     //2 bit ����Ϊ0
    uint8_t protectionAbsent;  //1 bit 1����û��CRC��0������CRC
    uint8_t profile;           //1 bit AAC����MPEG-2 AAC�����3��profile��MPEG-4 AAC�����6��profile��
    uint8_t samplingFreqIndex; //4 bit ������
    uint8_t privateBit;        //1bit ����ʱ����Ϊ0������ʱ����
    uint8_t channelCfg;        //3 bit ��������
    uint8_t originalCopy;      //1bit ����ʱ����Ϊ0������ʱ����
    uint8_t home;               //1 bit ����ʱ����Ϊ0������ʱ����

    uint8_t copyrightIdentificationBit;   //1 bit ����ʱ����Ϊ0������ʱ����
    uint8_t copyrightIdentificationStart; //1 bit ����ʱ����Ϊ0������ʱ����
    unsigned int aacFrameLength;               //13 bit һ��ADTS֡�ij��Ȱ���ADTSͷ��AACԭʼ��
    unsigned int adtsBufferFullness;           //11 bit �����������ȣ�0x7FF˵�������ʿɱ������������Ҫ���ֶΡ�CBR������Ҫ���ֶΣ���ͬ������ʹ�������ͬ�������ʹ����Ƶ�����ʱ����Ҫע�⡣

    /* number_of_raw_data_blocks_in_frame
     * ��ʾADTS֡����number_of_raw_data_blocks_in_frame + 1��AACԭʼ֡
     * ����˵number_of_raw_data_blocks_in_frame == 0
     * ��ʾ˵ADTS֡����һ��AAC���ݿ鲢����˵û�С�(һ��AACԭʼ֡����һ��ʱ����1024���������������)
     */
    uint8_t numberOfRawDataBlockInFrame; //2 bit
};

static int parseAdtsHeader(uint8_t* in, struct AdtsHeader* res) {
    static int frame_number = 0;
    memset(res, 0, sizeof(*res));

    if ((in[0] == 0xFF) && ((in[1] & 0xF0) == 0xF0))
    {
        res->id = ((uint8_t)in[1] & 0x08) >> 3;//�ڶ����ֽ���0x08������֮�󣬻�õ�13λbit��Ӧ��ֵ
        res->layer = ((uint8_t)in[1] & 0x06) >> 1;//�ڶ����ֽ���0x06������֮������1λ����õ�14,15λ����bit��Ӧ��ֵ
        res->protectionAbsent = (uint8_t)in[1] & 0x01;
        res->profile = ((uint8_t)in[2] & 0xc0) >> 6;
        res->samplingFreqIndex = ((uint8_t)in[2] & 0x3c) >> 2;
        res->privateBit = ((uint8_t)in[2] & 0x02) >> 1;
        res->channelCfg = ((((uint8_t)in[2] & 0x01) << 2) | (((unsigned int)in[3] & 0xc0) >> 6));
        res->originalCopy = ((uint8_t)in[3] & 0x20) >> 5;
        res->home = ((uint8_t)in[3] & 0x10) >> 4;
        res->copyrightIdentificationBit = ((uint8_t)in[3] & 0x08) >> 3;
        res->copyrightIdentificationStart = (uint8_t)in[3] & 0x04 >> 2;
        
        res->aacFrameLength = (((((unsigned int)in[3]) & 0x03) << 11) |
            (((unsigned int)in[4] & 0xFF) << 3) |
            ((unsigned int)in[5] & 0xE0) >> 5);

        res->adtsBufferFullness = (((unsigned int)in[5] & 0x1f) << 6 |
            ((unsigned int)in[6] & 0xfc) >> 2);
        res->numberOfRawDataBlockInFrame = ((uint8_t)in[6] & 0x03);

        return 0;
    }
    else
    {
        printf("failed to parse adts header\n");
        return -1;
    }
}

static int rtpSendAACFrame(int socket, const char* ip, int16_t port,
    struct RtpPacket* rtpPacket, uint8_t* frame, uint32_t frameSize) {
    //����ĵ���https://blog.csdn.net/yangguoyu8023/article/details/106517251/
    int ret;

    rtpPacket->payload[0] = 0x00;
    rtpPacket->payload[1] = 0x10;
    rtpPacket->payload[2] = (frameSize & 0x1FE0) >> 5; //��8λ
    rtpPacket->payload[3] = (frameSize & 0x1F) << 3; //��5λ

    memcpy(rtpPacket->payload + 4, frame, frameSize);

    ret = rtpSendPacketOverUdp(socket, ip, port, rtpPacket, frameSize + 4);
    if (ret < 0)
    {
        printf("failed to send rtp packet\n");
        return -1;
    }

    rtpPacket->rtpHeader.seq++;

    /*
     * �������Ƶ����44100
     * һ��AACÿ��1024������Ϊһ֡
     * ����һ����� 44100 / 1024 = 43֡
     * ʱ���������� 44100 / 43 = 1025
     * һ֡��ʱ��Ϊ 1 / 43 = 23ms
     */
    rtpPacket->rtpHeader.timestamp += 1025;

    return 0;
}

static int acceptClient(int sockfd, char* ip, int* port) {
    int clientfd;
    socklen_t len = 0;
    struct sockaddr_in addr;

    memset(&addr, 0, sizeof(addr));
    len = sizeof(addr);

    clientfd = accept(sockfd, (struct sockaddr*)&addr, &len);
    if (clientfd < 0)
        return -1;

    strcpy(ip, inet_ntoa(addr.sin_addr));
    *port = ntohs(addr.sin_port);

    return clientfd;
}

static char* getLineFromBuf(char* buf, char* line) {
    while (*buf != '\n')
    {
        *line = *buf;
        line++;
        buf++;
    }

    *line = '\n';
    ++line;
    *line = '\0';

    ++buf;
    return buf;
}

static int handleCmd_OPTIONS(char* result, int cseq) {
    sprintf(result, "RTSP/1.0 200 OK\r\n"
        "CSeq: %d\r\n"
        "Public: OPTIONS, DESCRIBE, SETUP, PLAY\r\n"
        "\r\n",
        cseq);

    return 0;
}

static int handleCmd_DESCRIBE(char* result, int cseq, char* url) {
    char sdp[500];
    char localIp[100];

    sscanf(url, "rtsp://%[^:]:", localIp);

    sprintf(sdp, "v=0\r\n"
        "o=- 9%ld 1 IN IP4 %s\r\n"
        "t=0 0\r\n"
        "a=control:*\r\n"
        "m=audio 0 RTP/AVP 97\r\n"
        "a=rtpmap:97 mpeg4-generic/44100/2\r\n"
        "a=fmtp:97 profile-level-id=1;mode=AAC-hbr;sizelength=13;indexlength=3;indexdeltalength=3;config=1210;\r\n"
   
        //"a=fmtp:97 SizeLength=13;\r\n"
        "a=control:track0\r\n",
        time(NULL), localIp);

    sprintf(result, "RTSP/1.0 200 OK\r\nCSeq: %d\r\n"
        "Content-Base: %s\r\n"
        "Content-type: application/sdp\r\n"
        "Content-length: %d\r\n\r\n"
        "%s",
        cseq,
        url,
        strlen(sdp),
        sdp);

    return 0;
}

static int handleCmd_SETUP(char* result, int cseq, int clientRtpPort) {
    sprintf(result, "RTSP/1.0 200 OK\r\n"
        "CSeq: %d\r\n"
        "Transport: RTP/AVP;unicast;client_port=%d-%d;server_port=%d-%d\r\n"
        "Session: 66334873\r\n"
        "\r\n",
        cseq,
        clientRtpPort,
        clientRtpPort + 1,
        SERVER_RTP_PORT,
        SERVER_RTCP_PORT
    );

    return 0;
}

static int handleCmd_PLAY(char* result, int cseq) {
    sprintf(result, "RTSP/1.0 200 OK\r\n"
        "CSeq: %d\r\n"
        "Range: npt=0.000-\r\n"
        "Session: 66334873; timeout=10\r\n\r\n",
        cseq);

    return 0;
}


static void doClient(int clientSockfd, const char* clientIP, int clientPort) {

    int serverRtpSockfd = -1, serverRtcpSockfd = -1;

    char method[40];
    char url[100];
    char version[40];
    int CSeq;

    int clientRtpPort, clientRtcpPort;
    char* rBuf = (char*)malloc(BUF_MAX_SIZE);
    char* sBuf = (char*)malloc(BUF_MAX_SIZE);

    while (true) {
        int recvLen;

        recvLen = recv(clientSockfd, rBuf, BUF_MAX_SIZE, 0);
        if (recvLen <= 0) {
            break;
        }

        rBuf[recvLen] = '\0';
        printf("%s rBuf = %s \n", __FUNCTION__, rBuf);

        const char* sep = "\n";
        char* line = strtok(rBuf, sep);
        while (line) {
            if (strstr(line, "OPTIONS") ||
                strstr(line, "DESCRIBE") ||
                strstr(line, "SETUP") ||
                strstr(line, "PLAY")) {

                if (sscanf(line, "%s %s %s\r\n", method, url, version) != 3) {
                    // error
                }
            }
            else if (strstr(line, "CSeq")) {
                if (sscanf(line, "CSeq: %d\r\n", &CSeq) != 1) {
                    // error
                }
            }
            else if (!strncmp(line, "Transport:", strlen("Transport:"))) {
                // Transport: RTP/AVP/UDP;unicast;client_port=13358-13359
                // Transport: RTP/AVP;unicast;client_port=13358-13359

                if (sscanf(line, "Transport: RTP/AVP/UDP;unicast;client_port=%d-%d\r\n",
                    &clientRtpPort, &clientRtcpPort) != 2) {
                    // error
                    printf("parse Transport error \n");
                }
            }
            line = strtok(NULL, sep);
        }

        if (!strcmp(method, "OPTIONS")) {
            if (handleCmd_OPTIONS(sBuf, CSeq))
            {
                printf("failed to handle options\n");
                break;
            }
        }
        else if (!strcmp(method, "DESCRIBE")) {
            if (handleCmd_DESCRIBE(sBuf, CSeq, url))
            {
                printf("failed to handle describe\n");
                break;
            }
        }
        else if (!strcmp(method, "SETUP")) {
            if (handleCmd_SETUP(sBuf, CSeq, clientRtpPort))
            {
                printf("failed to handle setup\n");
                break;
            }

            serverRtpSockfd = createUdpSocket();
            serverRtcpSockfd = createUdpSocket();
            if (serverRtpSockfd < 0 || serverRtcpSockfd < 0)
            {
                printf("failed to create udp socket\n");
                break;
            }

            if (bindSocketAddr(serverRtpSockfd, "0.0.0.0", SERVER_RTP_PORT) < 0 ||
                bindSocketAddr(serverRtcpSockfd, "0.0.0.0", SERVER_RTCP_PORT) < 0)
            {
                printf("failed to bind addr\n");
                break;
            }

        }
        else if (!strcmp(method, "PLAY")) {
            if (handleCmd_PLAY(sBuf, CSeq))
            {
                printf("failed to handle play\n");
                break;
            }
        }
        else {
            printf("����method = %s \n", method);
            break;
        }

        printf("%s sBuf = %s \n", __FUNCTION__, sBuf);

        send(clientSockfd, sBuf, strlen(sBuf), 0);


        //��ʼ���ţ�����RTP��
        if (!strcmp(method, "PLAY")) {

            struct AdtsHeader adtsHeader;
            struct RtpPacket* rtpPacket;
            uint8_t* frame;
            int ret;

            FILE* fp = fopen(AAC_FILE_NAME, "rb");
            if (!fp) {
                printf("��ȡ %s ʧ��\n", AAC_FILE_NAME);
                break;
            }

            frame = (uint8_t*)malloc(5000);
            rtpPacket = (struct RtpPacket*)malloc(5000);

            rtpHeaderInit(rtpPacket, 0, 0, 0, RTP_VESION, RTP_PAYLOAD_TYPE_AAC, 1, 0, 0, 0x32411);

            while (true)
            {
                ret = fread(frame, 1, 7, fp);
                if (ret <= 0)
                {
                    printf("fread err\n");
                    break;
                }
                printf("fread ret=%d \n",ret);

                 if (parseAdtsHeader(frame, &adtsHeader) < 0)
                {
                    printf("parseAdtsHeader err\n");
                    break;
                }
                ret = fread(frame, 1, adtsHeader.aacFrameLength - 7, fp);
                if (ret <= 0)
                {
                    printf("fread err\n");
                    break;
                }

                rtpSendAACFrame(serverRtpSockfd, clientIP, clientRtpPort,
                    rtpPacket, frame, adtsHeader.aacFrameLength - 7);

                Sleep(1);
                //usleep(23223);//1000/43.06 * 1000
            }

            free(frame);
            free(rtpPacket);

            break;

        }

        memset(method, 0, sizeof(method) / sizeof(char));
        memset(url, 0, sizeof(url) / sizeof(char));
        CSeq = 0;
    }

    closesocket(clientSockfd);
    if (serverRtpSockfd) {
        closesocket(serverRtpSockfd);
    }
    if (serverRtcpSockfd > 0) {
        closesocket(serverRtcpSockfd);
    }

    free(rBuf);
    free(sBuf);

}

int main() {
    // ���windows socket start
    WSADATA wsaData;
    if (WSAStartup(MAKEWORD(2, 2), &wsaData) != 0)
    {
        printf("PC Server Socket Start Up Error \n");
        return -1;
    }
    // ���windows socket end

    int rtspServerSockfd;

    int ret;

    rtspServerSockfd = createTcpSocket();
    if (rtspServerSockfd < 0)
    {
        printf("failed to create tcp socket\n");
        return -1;
    }

    ret = bindSocketAddr(rtspServerSockfd, "0.0.0.0", SERVER_PORT);
    if (ret < 0)
    {
        printf("failed to bind addr\n");
        return -1;
    }

    ret = listen(rtspServerSockfd, 10);
    if (ret < 0)
    {
        printf("failed to listen\n");
        return -1;
    }

    printf("%s rtsp://127.0.0.1:%d\n", __FILE__, SERVER_PORT);

    while (1)
    {
        int clientSockfd;
        char clientIp[40];
        int clientPort;

        clientSockfd = acceptClient(rtspServerSockfd, clientIp, &clientPort);
        if (clientSockfd < 0)
        {
            printf("failed to accept client\n");
            return -1;
        }

        printf("accept client;client ip:%s,client port:%d\n", clientIp, clientPort);

        doClient(clientSockfd, clientIp, clientPort);
    }

    closesocket(rtspServerSockfd);

    return 0;
}

rtp.cpp

#include <sys/types.h>
#include <WinSock2.h>
#include <WS2tcpip.h>
#include <windows.h>
#include "rtp.h"

void rtpHeaderInit(struct RtpPacket* rtpPacket, uint8_t csrcLen, uint8_t extension,
    uint8_t padding, uint8_t version, uint8_t payloadType, uint8_t marker,
    uint16_t seq, uint32_t timestamp, uint32_t ssrc)
{
    rtpPacket->rtpHeader.csrcLen = csrcLen;
    rtpPacket->rtpHeader.extension = extension;
    rtpPacket->rtpHeader.padding = padding;
    rtpPacket->rtpHeader.version = version;
    rtpPacket->rtpHeader.payloadType = payloadType;
    rtpPacket->rtpHeader.marker = marker;
    rtpPacket->rtpHeader.seq = seq;
    rtpPacket->rtpHeader.timestamp = timestamp;
    rtpPacket->rtpHeader.ssrc = ssrc;
}
int rtpSendPacketOverTcp(int clientSockfd, struct RtpPacket* rtpPacket, uint32_t dataSize)
{

    rtpPacket->rtpHeader.seq = htons(rtpPacket->rtpHeader.seq);
    rtpPacket->rtpHeader.timestamp = htonl(rtpPacket->rtpHeader.timestamp);
    rtpPacket->rtpHeader.ssrc = htonl(rtpPacket->rtpHeader.ssrc);

    uint32_t rtpSize = RTP_HEADER_SIZE + dataSize;
    char* tempBuf = (char *)malloc(4 + rtpSize);
    tempBuf[0] = 0x24;//$
    tempBuf[1] = 0x00;
    tempBuf[2] = (uint8_t)(((rtpSize) & 0xFF00) >> 8);
    tempBuf[3] = (uint8_t)((rtpSize) & 0xFF);
    memcpy(tempBuf + 4, (char*)rtpPacket, rtpSize);

    int ret = send(clientSockfd, tempBuf, 4 + rtpSize, 0);

    rtpPacket->rtpHeader.seq = ntohs(rtpPacket->rtpHeader.seq);
    rtpPacket->rtpHeader.timestamp = ntohl(rtpPacket->rtpHeader.timestamp);
    rtpPacket->rtpHeader.ssrc = ntohl(rtpPacket->rtpHeader.ssrc);

    free(tempBuf);
    tempBuf = NULL;

    return ret;
}
int rtpSendPacketOverUdp(int serverRtpSockfd, const char* ip, int16_t port, struct RtpPacket* rtpPacket, uint32_t dataSize)
{
    
    struct sockaddr_in addr;
    int ret;

    addr.sin_family = AF_INET;
    addr.sin_port = htons(port);
    addr.sin_addr.s_addr = inet_addr(ip);

    rtpPacket->rtpHeader.seq = htons(rtpPacket->rtpHeader.seq);
    rtpPacket->rtpHeader.timestamp = htonl(rtpPacket->rtpHeader.timestamp);
    rtpPacket->rtpHeader.ssrc = htonl(rtpPacket->rtpHeader.ssrc);

    ret = sendto(serverRtpSockfd, (char *)rtpPacket, dataSize + RTP_HEADER_SIZE, 0,
        (struct sockaddr*)&addr, sizeof(addr));

    rtpPacket->rtpHeader.seq = ntohs(rtpPacket->rtpHeader.seq);
    rtpPacket->rtpHeader.timestamp = ntohl(rtpPacket->rtpHeader.timestamp);
    rtpPacket->rtpHeader.ssrc = ntohl(rtpPacket->rtpHeader.ssrc);

    return ret;

}

rtp.h

#pragma once
#pragma comment(lib, "ws2_32.lib")
#include <stdint.h>

#define RTP_VESION              2

#define RTP_PAYLOAD_TYPE_H264   96
#define RTP_PAYLOAD_TYPE_AAC    97

#define RTP_HEADER_SIZE         12
#define RTP_MAX_PKT_SIZE        1400

 /*
  *    0                   1                   2                   3
  *    7 6 5 4 3 2 1 0|7 6 5 4 3 2 1 0|7 6 5 4 3 2 1 0|7 6 5 4 3 2 1 0
  *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  *   |V=2|P|X|  CC   |M|     PT      |       sequence number         |
  *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  *   |                           timestamp                           |
  *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  *   |           synchronization source (SSRC) identifier            |
  *   +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
  *   |            contributing source (CSRC) identifiers             |
  *   :                             ....                              :
  *   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  *
  */
struct RtpHeader
{
    /* byte 0 */
    uint8_t csrcLen : 4;
    uint8_t extension : 1;
    uint8_t padding : 1;
    uint8_t version : 2;

    /* byte 1 */
    uint8_t payloadType : 7;
    uint8_t marker : 1;

    /* bytes 2,3 */
    uint16_t seq;

    /* bytes 4-7 */
    uint32_t timestamp;

    /* bytes 8-11 */
    uint32_t ssrc;
};

struct RtpPacket
{
    struct RtpHeader rtpHeader;
    uint8_t payload[0];
};

void rtpHeaderInit(struct RtpPacket* rtpPacket, uint8_t csrcLen, uint8_t extension,
    uint8_t padding, uint8_t version, uint8_t payloadType, uint8_t marker,
    uint16_t seq, uint32_t timestamp, uint32_t ssrc);

int rtpSendPacketOverTcp(int clientSockfd, struct RtpPacket* rtpPacket, uint32_t dataSize);
int rtpSendPacketOverUdp(int serverRtpSockfd, const char* ip, int16_t port, struct RtpPacket* rtpPacket, uint32_t dataSize);


http://www.niftyadmin.cn/n/5322947.html

相关文章

开源云原生安全的现状

开源云原生安全的现状

近年来&#xff0c;人们非常重视软件供应链的安全。尤其令人担忧的是开源软件发行版中固有的风险越来越多。这引发了围绕云原生开源安全的大量开发&#xff0c;其形式包括软件物料清单 (SBOM)、旨在验证 OSS 包来源的项目等。 许多组织循环使用大型开源包&#xff0c;但只使用…
阅读更多...
利用邮件发送附件来实现一键巡检，附件是通过调用zabbix api生成的word和Excel

利用邮件发送附件来实现一键巡检，附件是通过调用zabbix api生成的word和Excel

HTML部分&#xff1a; <!DOCTYPE html> <html> <head><title>自动巡检</title><!-- 加入CSS样式 --> </head> <body><form id"inspectionForm"><label for"email">邮箱地址:</label>&…
阅读更多...
Kafka的安装、管理和配置

Kafka的安装、管理和配置

Kafka的安装、管理和配置 1.Kafka安装 官网: https://kafka.apache.org/downloads 下载安装包,我这里下载的是https://archive.apache.org/dist/kafka/3.3.1/kafka_2.13-3.3.1.tgz Kafka是Java生态圈下的一员&#xff0c;用Scala编写&#xff0c;运行在Java虚拟机上&#xf…
阅读更多...
SpringMVC(六）RESTful

SpringMVC(六）RESTful

1.RESTful简介 REST:Representational State Transfer,表现层资源状态转移 (1)资源 资源是一种看待服务器的方式，即，将服务器看作是由很多离散的资源组成。每个资源是服务器上一个可命名的抽象概念。因为资源是一个抽象的概念，所以它不仅仅能代表服务器文件系统中的一个文件…
阅读更多...
在Spring Boot项目中如何实现Redis缓存并防止缓存穿透和缓存雪崩？

在Spring Boot项目中如何实现Redis缓存并防止缓存穿透和缓存雪崩？

在Spring Boot项目中实现Redis缓存并防止缓存穿透和缓存雪崩可以通过以下步骤&#xff1a; 添加依赖&#xff1a; 在pom.xml文件中添加Spring Boot和Redis的依赖&#xff1a; <!-- Spring Boot Starter Data Redis --> <dependency><groupId>org.springframe…
阅读更多...
YOLOv5改进 | 注意力篇 | CGAttention实现级联群体注意力机制 (全网首发改进)

YOLOv5改进 | 注意力篇 | CGAttention实现级联群体注意力机制 (全网首发改进)

一、本文介绍 本文给大家带来的改进机制是实现级联群体注意力机制CascadedGroupAttention，其主要思想为增强输入到注意力头的特征的多样性。与以前的自注意力不同，它为每个头提供不同的输入分割，并跨头级联输出特征。这种方法不仅减少了多头注意力中的计算冗余，而且通过增…
阅读更多...
Leetcode刷题（二十四）

Leetcode刷题（二十四）

括号生成&#xff08;Medium&#xff09; 数字 n 代表生成括号的对数&#xff0c;请你设计一个函数&#xff0c;用于能够生成所有可能的并且 有效的 括号组合。示例 1&#xff1a;输入&#xff1a;n 3 输出&#xff1a;["((()))","(()())","(())()&…
阅读更多...
【b站咸虾米】新课uniapp零基础入门到项目打包（微信小程序/H5/vue/安卓apk）全掌握

【b站咸虾米】新课uniapp零基础入门到项目打包（微信小程序/H5/vue/安卓apk）全掌握

课程地址&#xff1a;【新课uniapp零基础入门到项目打包&#xff08;微信小程序/H5/vue/安卓apk&#xff09;全掌握】 https://www.bilibili.com/video/BV1mT411K7nW/?p12&share_sourcecopy_web&vd_sourceb1cb921b73fe3808550eaf2224d1c155 三、vue语法 继续回到官…
阅读更多...
最新文章

Copyright @ 2022~2023